This browser does not support the video element.
China fiber laser engraving machine 20W 30W 50W fiber laser Marking machine China
Product Description:
1. The processing material of the fiber laser engraver machine can be made of various metal materials, and it can also be made of
various non-metal materials. It is easier to mark some materials with higher hardness, higher melting point and strong brittleness, and the marking of these materials will be more obvious in the future.
2. The processing method of the fiber laser marking machine is processing that does not require contact. Its processing will not damage the quality of the product. After the processing is completed, there will be no signs of scratches and wear of the tool. The quality of the marking is very good.
3. The laser light of the fiber laser marking machine is very thin, which makes the processing use very few materials, and also makes the heat influence degree area generated by its processing very small.
4. The processing efficiency of the fiber laser marking machine is relatively high. It needs to be controlled by a computer, which makes the processing very easy and realizes the automatic marking operation.
SL-FC 30W fiber laser engraver machine Video on Youtube:
| Item Name | Technical Parameter | |
| Model | SL-FC 30W | SL-FC 50W |
| Laser Power | 30W | 50 W |
| Laser wavelength | 1064nm | |
| Laser type | Raycus / JPT / IPG laser source | |
| Pulse width | 120ns | |
| Repeat frequency | 30-60KHz | |
| Marking speed | ≤ 6000mm/s | |
| Marking depth | 0.01-0.5mm | |
| Marking area | 110*110mm / 175*175mm / 200*200mm / 300*300mm | |
| Power consumption | 600W | 800W |
| Operating voltage | 110V- 240V/50-60 Hz/15A | |
| Cooling | Air Cooling | |
| Packing size | 88*73*108cm (L*W*H) | |
| Gross weight | 120 KG | |
| Package | Standard export wooden case | |
Desktop JPT 30W 50W fiber laser marking machine with Genuine EZCAD marking software
Desktop Raycus / JPT / IPG 20W 30W 50W 100W fiber laser engraving machine with EZCAD
Desktop Raycus / JPT / IPG 20W 30W 50W 100W fiber laser engraving machine with EZCAD
Desktop Raycus / JPT / IPG 20W 30W 50W 100W fiber laser engraving machine with EZCAD
Desktop fiber laser engraving machine wide range application, mainly for all kinds of metal and most plastic. Especially
suitable for hardware tools, kitchenware knifes, plastic seals products, metal jewelry, label, integrate circuits, frames,
plumbing fittings and other products marking.