How to debug the fiber laser cutting machine to cut faster and better?

Laser machines are generally the most important decider in the manufacturing process of factories. The breakdown of a fiber laser cutting machine would definitely cause a loss in productivity and an extra cost. Therefore, debugging the fiber laser cutting machine is quite important to ensure smooth and stable production and profitability of the factories. So, how to debug the fiber laser cutting machines exactly? Please let me introduce that to you in the following contents.

l Here is the content list:

l Why is it important to do the debugging?

l How to debug the fiber laser cutting machine?

Why is it important to do the debugging?

Fiber laser cutting equipment has many parts, and the maintenance period of some parts is relatively short since fiber laser cutting machines often need to be maintained and frequent maintenance is required to keep the equipment in a relatively good operating condition. Another reason for the importance of debugging is that fiber laser cutting machines are often the key component in the production lines, and there is usually no backup of such a machine. So, keeping the operating condition of such a machine is keeping the producing stability of the whole factory, which ultimately decides the profitability of the factory.

How to debug the fiber laser cutting machine?

First, it is needed to adjust the laser machine parameters to increase the cutting speed of the machine. The machine parameters need to be adjusted step by step during the cutting process. Generally speaking, if the machine is not adjusted well, the speed will be affected, and the effect of the cutting will be influenced. Also, it is needed to debug according to the material type of the workpieces.

When setting parameters, pay attention to the following points: first, acceleration refers to the acceleration process from the initial speed in production to normal cutting. Similarly, when the cutting preparation is over, there will be a deceleration process. Too low acceleration will cause the machine to cut slowly. Second, initial speed This setting is the speed at which the machine starts. First of all, the initial speed cannot be as fast as possible. In fact, if the speed is too fast, it may cause the machine to start jitter very seriously. Adjust the fiber laser cutting machine assembly to improve the cutting effect of the machine is also needed. If the wire is not locked or the locking device is tilted or loose, the beam and coupling of the machine will affect the cutting effect of the fiber laser cutting machine. The installation of the guide rails must be parallel, and the Y-axis guide rails must ensure parallelism. The laser equipment needs to be debugged repeatedly when it leaves the factory to ensure the cutting effect of each piece of equipment at the factory. If the rails are not parallel, the machine will run under resistance.

If you are looking for more information concerning fiber laser cutting machines or are interested in finding a professional fiber laser cutting machine manufacturer to buy wonderful types of them. Then, you have turned on the right passage, please make sure you check out the web of Nanjing Speedy Laser Technology Co., Ltd, this professional laser machine manufacturer will definitely satisfy any orders and needs of you with their reliable and professional knowledge and their amazing production speed.