How to maintain the fiber laser marking machine routinely?

Fiber laser marking machines are one of the most expensive types of laser machines, even though they are very durable and can be used for a long time in most situations, damages may happen if there is not enough maintenance care for them. So, how to maintain the fiber laser marking machines exactly? Please let me introduce to you the following contents.

Here is the content list:

l  Why is there a need to maintain your machine routinely?

l  How to maintain a fiber laser marking machine?

Why is there a need to maintain your machine routinely?

As I have mentioned above, fiber laser marking machines are really expensive, even though many of them are quite reliable, they are still needed to be taken care of in case if there is any damage happens. The correct maintenance method of fiber laser cutting machine is the key factor to maintain its good performance and extend its service life. Although the maintenance manual will be provided to customers once the machine is purchased and delivered, there are still some precautions and instructions outside the manual that are needed to remember. Since the main cause of machine failure in any industry is lack of good maintenance. Most people don't take the time to understand that a machine can continue running for a long time without the need for any replacement or overhaul if there is just a little bit of maintenance every day. Fiber lasers make you spend a lot of money on the purchase, and it is in your best interest to learn some tips about keeping the equipment in top condition.

How to maintain a fiber laser marking machine?

So, what exactly are the instructions for the maintenance of a fiber laser marking machine? Well, when using the machine, the main aspect to pay attention to is the optical components. The focusing lens of the laser beam head is the most easily damaged and most costly part of the machine. Therefore, most designs will include a protective mirror above them. The lens is also equipped with a wear-resistant non-reflective film to provide further protection. This does not mean that you accidentally manipulated the protective lens. They are also expensive and prone to wear. You can do the following exercises when dealing with shots: Protect the optical lens and do not drop the lens while handling. Please handle the lens carefully when disassembling and cleaning. When disassembling, make sure that the lens is not in contact with hard objects. The anti-reflection film is extremely sensitive to dust and other forms of pollution (such as oil and grease). Do not operate the lens with bare hands. Do not touch or blow into the optical part of the lens. When using small lenses, use optical or vacuum tweezers. Establish a routine to always check optical lenses before and after use. The lens may be affected by very small particulate matter. When inspecting the lens surface, it is always recommended to use a magnifying glass. It may also be necessary to use strong light to illuminate the optical surface, amplify contaminants and identify any defects on the lens. Cleaning the protective lens is one of the most sophisticated machine maintenance methods. When cleaning the lens, make sure not to use your bare hands. When cleaning the lens, please use optical grade solvents and long-fiber absorbent cotton or lens paper. Usable wipes are cotton wipes, cotton balls, cotton swabs, and lens tissue. The non-reflective film is a wear-resistant component that can be replaced regularly. However, please make sure to keep it in a safe place so that it will not wear out quickly, because frequent disassembly may be the beginning of wearing protective glasses. Last but not least, only allow properly trained personnel to move and operate the machine. Although the fiber laser machine is relatively easy to operate, it is needed to only allow personnel who have a certain technical knowledge to engage in the maintenance and operation of the machine.

If you are looking for more information concerning fiber laser marking machines or are interested in finding a professional fiber laser marking machine manufacturer to buy wonderful types of them. Then, you have turned on the right passage, please make sure you check out the web of Nanjing Speedy Laser Technology Co., Ltd, this professional laser machine manufacturer will definitely satisfy any orders and needs of you with their reliable and professional knowledge and their amazing production speed.