Publish Time: 2020-10-29 Origin: Site
UV laser marking machine can engrave many materials, such as plastic, metal, leather, glass, some stones, crystal and so on. Widely used in cosmetics, medicine, medical and other industries. These industries use UV laser marking machines to prevent tampering and counterfeiting. These industries and brands use the machine to ensure lifetime brand protection. Before you start using a UV laser marking machine as your working machine, you should know how to use it, this article is all about this.
The following knowledge points are listed below:
The safety and instruction principle of using the UV laser marking machine
The machine installation and basic operation
The software installation of the UV laser marking machine
The daily maintainance of the UV laser marking machine
l Don't work alone
When users service or maintain the UV laser marking machine, it is best to have a familiar worker. The risks and knowledge of high voltage laser radiation will save you. For example, in the event of an accident, this.A person can help you turn off the laser equipment and provide relief.
l Properly allow air circulation
Some materials will produce harmful fumes (such as plastic) during laser processing, so if you wish to try, install an exhaust system before processing these materials,.
l Prevent the spread of harmful fumes.
(1) The UV laser marking machine must work in a better ventilation system environment.
(2) The laser beam can melt and evaporate almost any material. If used improperly, then different processing materials will produce different harmful fumes for people.
(3) If you want to do any maintenance, such as repairs and inspections, make sure that all power is on.The laser is turned off and fixed on the main switch. Turn off the main switch, remove the key, and then attach warning labels and marks to the laser, and do not reopen it until the problem is resolved.
(4) When checking the UV laser marking machine again, make sure all screws are tightened
(5) After the repair is completed, please check whether the safety installation is normal .Do not change the laser marking system without written authorization
l noise
The noise generated by the laser system is below 70db.
l worker
You should receive training before operating the UV laser marking machine.
l control
Do not modify the software or any other default settings in any way.
UV laser marking machine are not allowed to operate on highly reflective materials without optical isolators,
l Unpacking
1) Ensure that the packaging of the goods is consistent with the marks.
2) Remove the packing box seal
3) Remove the packaging materials around the unit
4) Check the shipping list carefully and report any items that do not conform to the contract to the shipper
l Space and environment
l The system should be installed in a place without dust, strong electromagnetic field, petroleum and smoke. It is forbidden to disclose organic acid vapor or other corrosive gas To avoid vibration and shocking, it should be flat and hard.
l Air cooling system
The UV laser marking machine uses an air-cooled system, and the temperature is maintained between 15 ° C and 35 ° C.
l Basic operation steps
(1) Turn on
Turn on the computer, press the automatic power lock button on the device to start the Raycus fiber laser (or turn on the UV laser marking machine),run the software EzCad to make or load the file to be marked. Mark is ready.
(2) Turn off
Save the file, quit the software and shut down the computer, after 3 minutes, press the automatic power lock button on the device to turn off the laser power .You can shut down by pressing this button. Disconnect the main power.
The software is copied from the CD or downloaded directly from the manufacturer's website, and the EzCad shortcut is sent to the desktop, and you will see corn on your computer desktop. Install the driver.
After a few times, you should do some daily maintenance as follows:
1) The electrical control system works normally
2) Computer system works well
3) The marking software works well
4) The lifting platform is not loose, the screws are not loose, and they are not falling
5) The UV laser marking machine light source air cooling system works normally
6) Do not squeeze the fiber, ensure that the protective cover is intact
7) Keep the lens clean
8) Keep the equipment clean
So now you know you probably should know how to run a UV laser marking machine now. We produce Portable fiber laser marking machine, Table type fiber laser marking machine, contact us.