You are here: Home » Products » LASER WELDING MACHINE » Dual-optical path fiber transmission handheld laser welding machine

Related News

content is empty!

Share to:

Dual-optical path fiber transmission handheld laser welding machine

Laser welding machines use high-energy pulsed lasers to weld objects. The pulsed discharge of the xenon lamp by the laser power source generates light waves of a certain frequency and pulse width and radiates to the Nd3+:YAG crystal through the condenser cavity. Head or switch to fiber optic conduction for two modes of welding.

  • SL-WL 300W / 500W
  • Speedy Laser
  • 8515809090
  • Laser power: 300W / 500w
  • Application: 1-2mm stainless steel welding
Quantity:
Machine introduction:
Laser welding machines use high-energy pulsed lasers to weld objects. The pulsed discharge of the xenon lamp by the laser power source generates light waves of a certain frequency and pulse width and radiates to the Nd3+:YAG crystal through the condenser cavity. The crystal emits a pulsed laser of 1064 nm after being resonated, and then passes the standard welding after expanding, reflecting, and focusing. Head or switch to fiber optic conduction for two modes of welding.
 
The working principle of this laser deposition welding system is based on the laser high heat energy and centralized fixed welding technology, which effectively handles all the small parts of the welding, and makes up for the shortcomings of traditional soldering and argon arc welding technology. The two thresholds of thermal strain and post-processing are avoided, and the environmental protection is pollution-free, which greatly improves the connection strength and quality of the welding. The conventional hard light path can be used for welding, and the hand-held laser welding can also be switched.

Machine features:
1. Red light quickly find the welding point, CCD visual observation.
2. Double optical circuit welding design, hard light path and soft light path can be used interchangeably.
3. Fast processing speed, dedicated fixed-focus rotary bearing positioning rod, CCD rapid alignment welding spot      welding.
4. Heat deformation and heat affected zone are small.
5. Local heat treatment of metal;
6. It can process complicated parts and tiny objects.
7. The process is noiseless and has no pollution to the environment;
8. Ultra-fine bearing rotating positioning rods reduce the friction of the plate during welding, and there is no need     to adjust the spot position at the corner of the font.
9. Due to advanced processing methods, the quality of existing metal welding has been greatly improved.
10. LED ring special spotlights, solder point lighting no dead ends.
 
Application:
Welding 1-2mm stainless steel, stee.

Technical Parameters:

       Model             SL-WL300W                 SL-WL500W
       HS code                       8515800090
       Fiber cable length                        5 Meter
       Working table                       750*1000mm
       Max weight table                       ≤  200KG
       Power supply                 220V±10%/50Hz               380V±10%/50Hz
       Laser Type                 Nd: YAG Pulse
       Beam diameter                    0.2-3mm
       Laser wavelength                   1064nm
       Pulse duration                    ≤ 15ms
       Laser power                     300W                      500W
       Single pulse energy                       80J                      100J
       Pulse frenquency                     ≤ 30Hz                      ≤ 50Hz
       Laser focus                   180mm
       Cooling                Water cooling
       Cooling capacity                      2700W                    5000W
       Power consumption                      <  9KW                   < 12KW
       Observation system                        CCD
      Laser head length                      1300mm
      Machine size
      Chiller size
         1450*800*1100mm
          700*500*900mm
          1450*800*1100mm
          900*700*900mm
      Packing size
      Chiller size
         1530*830*1100mm
         760*560*1000mm
         1530*810*1100mm
          960*760*1150mm
       Gross weight               320KG                  430KG
 
laser welding machine for stainless steel

Product Inquiry

Products

Contact Us

Gary hou
Tel: 0086-18651899782
3 Building No 8 Longtai Road,Nanjing New & High Technology Industry Development Zone, Pukou District,Nanjing,China.210061

leave message

Leave a Message