Views: 1 Author: Site Editor Publish Time: 2020-12-17 Origin: Site
During the operation and maintenance of the fiber laser cutting machine, you must remember some basic safety precautions and some simple precautions. Fiber laser cutting system is an advanced cutting technology system used in manufacturing workshops around the world, which requires advanced maintenance and maintenance methods. With proper maintenance and safe eyes, you can keep your fiber laser machine cutting for years. Let’s have a check about the safety of the fiber laser cutting machines.
The following knowledge points are listed below:
Understand your machine
Understanding the power supply
Do not bypass these doors
Put on your safety glasses
Cooling
Stable hands
Keep it straight
Do not delete it
Clean up area
First you must understand your fiber laser cutting machine. Read and understand the maintenance manuals for machines, chillers, power supplies, dust collectors, and other parts and accessories that connect or operate laser cutting systems.
It is important to understand that many projects have their own power supply. Although you may have turned off the power of the fiber laser cutting machine, the chiller may still be live. Know where all the circuit breakers are and how to properly lock them in a safe position.
Before any maintenance, please make sure that the fiber laser has completed all the actions, because sometimes there will be a pause in the program, for example, the movement of the shuttle watch may not be seen in the operation area.
During installation and normal operation, it is easy for the operator to bypass the door switch to operate the fiber laser cutting machine with the front door or loading door open. If your fiber laser machine bypasses these door locks, your operators and surrounding staff will not only be exposed to a first-class fiber laser (may be blind!), But there may be loose parts during rapid movement Eject from the machine. In addition, because the essence of the fiber laser cutting machine system is the rapid processing of materials, it has extremely high speed, and anyone who accidentally enters the movement area may be clamped or crushed.
In the fiber laser cutting machine, the light source has never been as strong and powerful as in the fiber laser cutting machine. These lasers are usually protected by sturdy cabin design and expensive green glass from the flashlight and eye burns of the operator and surrounding work area. When maintaining your fiber laser, be sure to take precautions, wear your Class-1 laser approved safety glasses, and any other recommended safety equipment.
According to the manufacturer's recommendations, the cooler is properly maintained by checking the level of the fan and coolant and ensuring that the filter is clean and clear. Before turning on the solid-state fiber laser resonator, you must also ensure that the chiller is running and cooling, because the cooling source must be in place. These fiber laser power supplies / resonators generate a lot of heat during normal operation and must be removed through the cooling process. A dirty or damaged chiller, if not maintained properly, may cost tens of thousands of dollars to repair the damaged fiber laser resonator.
When maintaining components of fiber laser cutting machine, do not handle or discard them by mistake. There are very precise tuning and alignment components in the laser system, including optical components, which are easily damaged or destroyed by unintentional drops. When maintaining these sensitive parts, take extra precautions.
Although the fiber optic cable is flexible by design, it does not mean that it is tightly wound or coiled like the old extension cord. Please keep in mind that the larger "wires" in the shield, such as a cable that is a glass optic, can be broken or broken, which will greatly affect the cutting performance of your fiber laser cutting machine. In addition, these cables require special equipment and a clean environment to replace, so it is an extra precaution and you should deal with them.
Do not remove the optical cable from the cutting head or laser power supply. These areas are very suspicious, even the slightest dust, so only one factory-trained technician should use appropriate tools to keep the head and cable connections clean and disassembled.
When operating the fiber laser cutting machine and shuttle workbench or loading and unloading system, make sure the area around the machine is clean. In some cases, it is easy for workers to slip into the photoprotection area to retrieve materials, waste, etc. during non-operation. This is in a hazardous area. When these components are put into use, they are not protected.
If you follow these and other safety measures, your machine manufacturer recommends that your fiber laser cutting machine, CO2 LASER MARKING MACHINE, FIBER LASER MARKING MACHINE can produce quality parts in the coming years. Although these systems require much less maintenance than older carbon dioxide laser cutting systems, a few simple steps can be used to avoid any preventable problems.
